Propspeed DIY Kit
  • Propspeed DIY Kit



    With an ultra-slick topcoat, Propspeed is specially formulated to prevent marine growth from bonding to metal surfaces below the waterline. It is proven to increase boat efficiency, reduce drag and save fuel and maintenance costs. It features an exceptionally strong chemical and mechanical bond between the metal substrate, the Etching Primer and the Clear Coat– ensuring that the Propspeed coating actually sticks to your running gear and performs season after season.

    Propspeed also reduces the risk of corrosion by electrically isolating the metal, as well as limiting the exchanges between the ions and the gases contained in the water and the metal. In short, if a reaction can’t occur, there will be no corrosion!

    The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives and other underwater metal.


    In The Kit:

    • Propclean
    • Propprep
    • 3a & b = Etching Primer Base & Hardner
    • Clear Coat
    • Mixing Stick




    •  1 x Propeller 30-60cm or 12-24" size
    • Surface: Propspeed Small Kit will surface 0.7m2/ 7.5ft2.


    •  1 x Propeller 66-96.5cm or 26-38" size
    • 2 x Propellers 36-76cm or 13-30" size
    • Surface: Propspeed Medium Kit will surface 1.7m2/ 18.3ft2.



    For all product enquiries, please contact us via the chat below or contact the shop today.